Lubridraw 3320 
# 6005900000-CT2021
275 Gallon Tote
# 6005900000-CT3B38
55 Gallon Drum

DOWNLOAD TDS

Construction MarketsIndustrial MarketsEnergy Markets
Automotive MarketsHeavy Mobile MarketsSteel Markets
Mining Markets

Need SDS file access?

DESCRIPTION
Lubridraw 3320 is heavy duty completely emulsifiable drawing oil concentrate. It is very stable in hard and soft water. Lubridraw 3320 is designed for the most severe drawing and blanking operations on cold rolled steel and stainless steel along with non-ferrous metals such as copper, brass, and aluminum.

In heavier dilutions with water, Lubridraw 3320 is suitable for the most severe blanking, forming, stamping, and piercing operations on cold rolled, hot rolled, and stainless steels, particularly in high-speed eyelet machine stamping operations. It may be flooded, sprayed, brushed, or roll-coated on the blanks or coil stock entering the press. Typically Lubridraw 3320 is run between 5-15% depending on the severity of the draw. Lubridraw 3320 emulsifies easily in tank side proportioning units and will not leave a heavy waxy buildup on the dies or your parts. Lubridraw 3320 may be diluted with any lower viscosity diluent oil such as hydraulic oil, spindle oil, EDM oil, or solvent for less severe drawing or stamping requirements.

BENEFITS
• Easily washed off for post machining applications
• High level of lubricity makes it ideal for a multi-purpose workhorse in one facility
• Low foaming and easily emulsifiable for proportioning units

APPROVALS
• Compliant with California SCAQMD Rule 1144

TYPICAL PROPERTIES
Fluid Type   Drawing Oil
Appearance   Amber
Odor   Mild petroleum
Specific Gravity, 60°F (15.6°C)   1.14
Weight, 60°F (15.6°C)   9.49 lbs/gal.
Flash Point (COC)   335°F (168.3°C)
pH (10% dilution)   9.5
VOC, ASTM 1868   69.7 grams/liter

Lubridraw-3320

Lubridraw 3305-WX 
# 6027000000-CT2C80
275 Gallon Tote
# 6027000000-CT3C80
55 Gallon Drum

DOWNLOAD TDS

Construction MarketsIndustrial MarketsEnergy Markets
Automotive MarketsHeavy Mobile MarketsSteel Markets
Mining MarketsMarine MarketsAgriculture Markets

Need SDS file access?

DESCRIPTION
Lubridraw 3305-WX is medium to heavy duty completely emulsifiable drawing oil concentrate. It is very stable in hard and soft water. Lubridraw 3305-WX is designed for severe drawing and blanking operations on cold rolled steel and stainless steel along with non-ferrous metals such as copper, brass, and aluminum. Its unique sulfonate free chemistry provides bacteria resistant fluid that will not go rancid.

In heavier dilutions with water, Lubridraw 3305-WX is suitable for a variety of blanking, forming, stamping, and piercing operations on cold rolled, hot rolled, and stainless steels, particularly in high-speed eyelet machine stamping operations. The product may be flooded, sprayed, brushed, or roll coated on the blanks or coil stock entering the press. Typically, Lubridraw 3305-WX is run between 5-15% depending on the severity of the draw. Lubridraw 3305-WX emulsifies easily in tank side proportioning units and will not leave a heavy waxy buildup on the dies or parts.

BENEFITS
• Easily washed off for post machining applications
• Sulfonate free chemistry yields rancid free residues
• High level of lubricity makes the product ideal for a multi-purpose workhorse in one facility
• Low foaming and easily emulsifiable for proportioning units
• Superior corrosion protection

APPROVALS
• Super-compliant for California SCAQMD Rule 1144

TYPICAL PROPERTIES
Fluid Type   Drawing Oil
Appearance   Opaque
Odor   Mild
Specific Gravity, 60°F (15.6°C)   1.01
Weight, 60°F (15.6°C)   8.40 lbs/gal.
Flash Point (COC)   335°F (168.3°C)
pH (10% dilution)   9.5
VOC, ASTM 1868   48.7 grams/liter

Lubridraw-3305-WX

CT 118-B1 
# 2302200000-­CT2019
275 Gallon Tote
# 2302200000-­CT3006
55 Gallon Drum
# 2302200000-­CT5234
5 Gallon Pail

DOWNLOAD TDS

Construction MarketsIndustrial MarketsEnergy Markets
Automotive MarketsSteel MarketsMining Markets
Marine MarketsAgriculture Markets

Need SDS file access?

DESCRIPTION
CT 118-B1 is a concentrated synthetic forming fluid for ferrous and non-ferrous metals. It can be utilized for all medium to severe forming applications such as deep drawing, forming, roll forming, stamping, tube drawing, and bending of cold rolled steel, carbon steel, aluminum, copper and brass alloys. CT 118-B1 offers a balanced lubrication package containing both boundary and extreme pressure additives for enhanced forming performance. CT 118-B1 contains no chlorinated additives.

CT 118-B1 is also well suited for a broad range of machining and grinding operations on ferrous and nonferrous metals. Having the versatility to machine, grind, draw and stamp ferrous and nonferrous metals with one product maximizes your total metalworking capabilities.

APPLICATION
CT 118-B1 may be applied to the workpiece by any conventional method (manually, dip, spray, flood, roll coater, proportioning unit, etc.).

BENEFITS
• Water extend-able synthetic fluid
• Offers exceptional wetting and coverage properties on ferrous and non-ferrous surfaces
• Enhanced corrosion protection on all ferrous and non-ferrous alloys
• Easily removable with hot water or mild alkaline cleaners
• Good compatibility with a variety of types of process water chemistries
• Designed for both once-through and circulating systems
• Completely free of all chlorinated additives
• Formaldehyde free
• No chelants
• No petroleum oil/solvents
• No heavy metals

TYPICAL PROPERTIES
Fluid Type   Synthetic
Appearance   Amber liquid
Odor   Mild chemical
Specific Gravity, 60°F (15.6°C)   1.009
Weight, 60°F (15.6°C)   8.405 lbs/gal.
Boiling Point (COC)   212°F (100°C)
Flash Point (COC)   None, self extinguishing
Freezing Point (COC)   32°F (0°C)
pH (concentrate)   10.36
pH (5% dilution)   9.66

CT 3300 FE 
# 6000100000-­CT2019
275 Gallon Tote
# 6000100000-­CT3006
55 Gallon Drum
# 6000100000-­CT5B71
5 Gallon Pail

DOWNLOAD TDS

Construction MarketsIndustrial MarketsEnergy Markets
Automotive MarketsHeavy Mobile MarketsSteel Markets
Mining MarketsMarine MarketsAgriculture Markets

Need SDS file access?

DESCRIPTION
CT 3300 FE is suggested as a heavy duty, deep drawing and stamping lubricant for all types of metals where the operation will not allow a chlorinated product. It is particularly suggested as a brass, copper, and aluminum tube drawing lubricant and as a drawing/stamping lubricant for all ferrous metals, including galvanized and stainless. Applied as received, CT 3300 FE will permit several operations on the same part without reapplication, provided the parts are not annealed or cleaned between operations. A high polar attraction to metal substrates guarantees thorough wetting out over the entire surface of the blank workpiece, yet it will clean easily and can be painted or plated without concern for a lack of adhesion.

APPLICATION
For Drawing / Stamping
CT 3300 FE may be applied to the work by any conventional method, including dip, flooding, spray, roll coater, or by hand with a brush or sponge. Blanks or coils may be pre-coated with CT 3300 FE and dried with forced warm air without losing any film strength or lubricity. It can be used straight (neat) or cut back with water for less demanding applications.

For Tube Bending
CT 3300 FE may be applied neat by swabbing or brushing onto the tube and/or the mandrel. For long pieces, it may be diluted 1:1 with water and squirted inside the tube. Many tube benders, however, apply it directly through the mandrel.

BENEFITS
• Easily washed off for post-machining applications
• High level of lubricity makes CT 3300 FE ideal for a multi-purpose workhorse lubricant 
• Low foaming and easily emulsifiable for proportioning units

TYPICAL PROPERTIES
Fluid Type   Synthetic
Appearance   Tan liquid
Odor   Mild
Texture   Heavy oil paste
Weight, 60°F (15.6°C)   8.55 lbs/gal.
Viscosity, Brookfield, 75°F (24°C)   1,400 cps

Lubriform 2600 
# 6017400000-­CT2030
275 Gallon Tote
# 6017400000-­CT3230
55 Gallon Drum

DOWNLOAD TDS

Construction MarketsIndustrial MarketsEnergy Markets
Automotive MarketsHeavy Mobile MarketsSteel Markets
Mining MarketsMarine MarketsAgriculture Markets

Need SDS file access?

DESCRIPTION
Lubriform 2600 is a concentrated, semi-synthetic forming fluid for ferrous and non-ferrous metals. It can be utilized for all medium to severe forming applications such as deep drawing, forming, roll forming, stamping, tube drawing, and bending of cold rolled steel, carbon steel, aluminum, copper and brass alloys. Lubriform 2600 offers a balanced lubrication package containing both boundary and extreme pressure additives for enhanced forming performance. Lubriform 2600 contains no chlorine or chlorinated additives. Lubriform 2600 is a versatile product and can be used on most ferrous and non-ferrous metals.

APPLICATION
Lubriform 2600 is recommended for general purpose machining of aluminum alloys, non-ferrous and aluminum alloys, and tougher exotic alloys (both non-ferrous and ferrous).

BENEFITS
• Water extendable, semi-synthetic fluid
• Exceptional wetting and coverage properties on ferrous and non-ferrous surfaces
• Enhanced corrosion protection on all non-ferrous alloys
• Easily removable with hot water or mild alkaline cleaners
• Good compatibility with a variety of types of process water chemistries
• Designed for both once-through and circulating systems
• Completely free of all chlorinated chemistries: formaldehyde free

TYPICAL PROPERTIES
Fluid Type   Semi-synthetic fluid
Appearance   Viscous, amber fluid
Odor   Mild
Specific Gravity, 60°F (15.6°C)   0.97
Weight, 60°F (15.6°C)   8.05 lbs/gal.
pH (10% dilution)   8.70 – 9.50